Why Z-Axis Products Applications Test Fixtures Projects Gallery Downloads Links  

Z-Carbon LCD Connector

LCD connectors are a standard in the industry. The connectors are made of carbon-impregnated layers of silicon rubber separated by layers of non-conductive silicon.

These connectors conform to the surface of the mating substrates to create a gasket- like seal against adverse environmental conditions as well as being shock and vibration resistant.

The use of zero insertion force LCD connectors requires that line centres match on the connected surfaces. The connection densities of 100, 140 and 250 connections per inch of LCD connectors provides redundant contact in most applications and this fine spacing also prevents the shorting of adjacent contacts.

 

 
Z-Carbon LCD Connector
without insulation
Z-Carbon LCD Connector
with foam padding
or solid silicone
Z-Carbon LCD Connector
with insulation

  

 

DIMENSIONS
  inches mm
Height(H) .040 +/- .003
to 1.500 +/- .010
1.0 +/- 0.08
to 38 +/- 0.25
Width(W) .010 +/- .002
to .100 +/- .006
0.51 +/- 0.05
to 2.54 +/- 0.15
Length(L) .035 +/- .005
to 2 +/- .010
to 8 +/- .020
0.89 +/- 0.125
to 50 +/- 0.25
to 203 +/- 0.5
Recommended Height/Width ratio is 1.5:1 to 5:1
NOMINAL SPECIFICATIONS
Conductive Layers: 100 per inch
39.37 per cm
140 per inch
55.12 per cm
250 per inch
98.43 per cm
Layer Thickness: .005"
0.127mm
.0035"
0.089mm
.002"
0.051mm
Deflection: 5 - 20%
Clamping Force Per Linear Inch: 7DW (lbs.)
TYPICAL PROPERTIES
Contact Resistance: 1000 Ohms
Current Carrying Capacity: 5mA
Resistance Between
Conductor Layers:
10*E12 Ohm - min.
Dielectric Constant: 2.8
Temperature Range:
Standard:
-40 to 175 degrees C
Low Temp:
-65 to 175 degrees C
Humidity Range: 0 to 100%
Layer Durometer:
Conductive: 60 Shore A
Non Conductive: 50 Shore A


Request more information >>
Copyright © 2009. Z-Axis Europe mail: info@z-axiseurope.com Tel: +972-52-7772247, +972-54-6227975. All Rights Reserved.Created by Catom web design