Why Z-Axis Products Applications Test Fixtures Projects Gallery Downloads Links  

Z-Silver

These can provide low resistance connections for many component to board or board to board applications. Typically used to mate Flex Circuits or PCBs to LCD modules, EL displays, LED backlights and other PCBs.

These connectors conform to the surface of the mating substrates to create a gasket- like seal against adverse environmental conditions as well as being shock and vibration resistant.

 

Z-Silver Connector
without insulation
Z-Silver Connector
with foam padding
or solid silicone
Z-Silver Connector
with insulation

 

DIMENSIONS
  inches mm
Height(H) .040 +/- .003
to .500 +/- .010
1.0 +/- 0.08
to 12.7 +/- 0.25
Width(W) .020 +/- .002
to .100 +/- .006
0.51 +/- 0.05
to 2.54 +/- 0.15
Length(l) .035 +/- .005
to 2 +/- .010
to 8 +/- .020
0.89 +/- 0.125
to 50 +/- 0.25
to 203 +/- 0.5
Recommended Height/Width ratio is 1.5:1 to 5:1
NOMINAL SPECIFICATIONS
Conductive Layers: 100 per inch
39.37 per cm
200 per inch
98.43 per cm
Layer Thickness: .005"
0.127mm
.0025
0.064mm
Deflection: 5 - 20%
Clamping Force Per Linear Inch: 8DW (lbs.)
TYPICAL PROPERTIES
Contact Resistance: 0.1 Ohms
Current Carrying Capacity: 1A
Resistance Between
Conductor Layers:
10*E12 Ohm - min.
Dielectric Constant: 2.8
Temperature Range:
Standard:
-40 to 125 degrees C
Low Temp:
-65 to 125 degrees C
Humidity Range: 0 to 100% non-condensing
Layer Durometer:
Conductive: 60 Shore A
Non Conductive: 50 Shore A


Request more information >>
Copyright © 2009. Z-Axis Europe mail: info@z-axiseurope.com Tel: +972-52-7772247, +972-54-6227975. All Rights Reserved.Created by Catom web design